Syngas production using straw pellet gasification in fluidized bed allothermal reactor under different temperature conditions
  • 2186 views
  • Author:
    Niels BK Rasmussen, Nabin Aryal
  • Abstract:

    Straw is one of the most available agriculture waste materials to be utilized as resource. Straw gasification for syngas production is one of the alternatives for resource recovery. 

    Nevertheless, straw gasification might be problematic due to high alkali content, which may cause fouling of the gasifier reactor. In the present study, straw was gasified at different temperatures; in particular 750 °C, 800 °C, 850 °C, 900 °C, and 950 °C furnace temperature, was evaluated and then compared with wood feedstock using allothermal gasifier. 

    The tested temperatures are not the limiting factor for the wood gasification using olivine (Mg2+,Fe2+)2SiO4 bed material and catalysis. Relatively, lower temperature is appropriate for straw gasification where agglomeration with bed material was observed at a higher temperature.

  • Journal:
    Fuel
  • Publisher:
    Elsevier
  • Volume (Issue):
    263
  • Page:
    116706
  • Sector:
    Biomass and Biowaste    Bioenergy and Biofuel   
  • Publication Type:
    Research Article
  • View Full Publication
  • Memory Quiz

Quick Contact

I accept  terms and conditions of Greenesa.